Bank capital requirements and Basel III in plain English
A plain-English guide to bank capital requirements: what capital is, how risk-weighted assets work, the Basel III ratios and buffers, and how US rules apply.
Bank capital is the cushion that absorbs losses before a bank becomes unable to pay its depositors and other creditors. In accounting terms it is the difference between a bank’s assets and its liabilities, meaning the owners’ stake. Capital requirements are rules that set the minimum amount of that cushion a bank must hold, usually as a percentage of its assets after adjusting for risk. Basel III is the name of the international set of standards, written by the Basel Committee on Banking Supervision, that most countries use as the starting point for those rules.
The topic is technical, and agency releases about it are full of acronyms. The central idea is simple, though: banks fund themselves with a mix of deposits, debt and equity. Equity is the part that can lose value without triggering a failure. Regulators require banks to keep enough equity, and especially high-quality equity, so that a downturn does not push them into insolvency or force the government to step in.
In brief
- Capital is a bank’s loss-absorbing funding, led by common equity.
- Requirements are mostly expressed as ratios to risk-weighted assets (RWAs), with a separate leverage ratio that ignores risk weights.
- Basel III raised the quality and quantity of capital and added buffers, a leverage ratio and liquidity standards.
- In the US, the Federal Reserve, OCC and FDIC each implement capital rules for the banks they supervise.
- Larger and more complex banks face additional requirements, including the stress capital buffer and surcharges for the most systemic firms.
Why capital matters
A bank takes in deposits and lends them out or invests them. Its assets, such as loans and securities, can lose value. Deposits and other borrowings are fixed claims that must be repaid in full. If asset losses exceed the equity cushion, the bank cannot cover its liabilities. Capital therefore protects depositors, the deposit insurance fund and, indirectly, taxpayers, and it also gives owners a reason to be careful, since they lose first.
There is a trade-off. Equity is generally more expensive for a bank than deposits, so higher capital requirements can reduce the returns to shareholders and may affect how much the bank lends, or at what price. Regulators, banks and academics disagree about where the right balance lies, and that disagreement shapes each round of rulemaking.
The Basel Committee and why it matters
The Basel Committee on Banking Supervision is a forum of central banks and supervisors from many countries, hosted by the Bank for International Settlements in Basel, Switzerland. It issues standards, not laws. Each member country decides how to implement them, and each national rule can differ in detail and timing. The first accord, from 1988, introduced risk-based capital. Basel II refined it in the 2000s. Basel III was developed in response to the 2007-2009 financial crisis, when many banks entered the crisis with capital that proved poor in quality or too thin.
In the US, the banking agencies adopted rules to implement Basel III, and the Federal Reserve maintains a page describing its Basel regulatory framework. The rules are codified for Federal Reserve-supervised institutions in Regulation Q (12 CFR Part 217), and the OCC and FDIC have corresponding provisions for the banks they supervise. The agencies have also published proposals to revise parts of the framework, including the elements often called the Basel III endgame. Because rule status can change, check each agency’s website and the Federal Register for the current position.
What counts as capital
Basel III sorts capital by how reliably it can absorb losses.
Common equity tier 1 (CET1). The highest-quality capital: common stock, retained earnings and certain other reserves, less deductions such as goodwill and certain intangible assets. CET1 absorbs losses while the bank keeps operating, which is why regulators focus on it.
Additional tier 1 (AT1). Instruments such as perpetual preferred stock that can absorb losses but are lower in quality than common equity. CET1 plus AT1 equals tier 1 capital.
Tier 2. Supplementary capital, such as certain subordinated debt, that absorbs losses mainly when a bank is failing. Tier 1 plus tier 2 equals total capital.
Regulators subtract items that cannot be relied on in a stress, which is why reported equity in a financial statement is not the same as regulatory capital.
Risk-weighted assets
Rather than treat all assets alike, capital rules assign risk weights. Cash and US government securities are weighted low or at zero. Residential mortgages, commercial loans, credit card balances and equity exposures carry higher weights. Off-balance-sheet items, such as unused loan commitments and derivatives, are converted into asset-equivalent amounts and then weighted. Market risk and operational risk add further components for banks with large trading books or meaningful operations.
Risk-weighted assets are the total after applying all those weights. A bank with a lot of low-risk assets can have large total assets and small RWAs, and vice versa. The approach rewards safer balance sheets but invites debate over whether the weights are accurate. Basel III’s revisions aim to make the weights less dependent on banks’ own models, which has been a central point of contention in revision proposals.
Two methods exist in the US framework: a standardized approach, where the regulation prescribes the weights, and an advanced approach, which for the largest banks allows internal models. Large banks generally have to compute RWAs both ways and meet requirements under whichever produces the stricter result. This is known as the dual-stack arrangement.
The main ratios
The core measures are:
- CET1 ratio: CET1 capital divided by RWAs.
- Tier 1 capital ratio: tier 1 capital divided by RWAs.
- Total capital ratio: total capital divided by RWAs.
- Tier 1 leverage ratio: tier 1 capital divided by average total assets, with no risk weighting. It is a backstop in case the risk weights understate risk.
- Supplementary leverage ratio: a broader version that includes certain off-balance-sheet exposures, applying to the largest banks, with an enhanced version for the most systemic ones.
The regulations state minimum percentages for each. This guide does not restate the numbers, because they vary by bank category and can be revised. The Federal Reserve, OCC and FDIC post them on their capital pages, and the rule text is on eCFR.
Buffers on top of the minimums
Basel III adds buffers that sit above the minimums and that banks are expected to draw on in stress rather than treat as hard floors.
- Capital conservation buffer. A fixed buffer of CET1 above the minimum. For most banks in the US it works this way; for large firms subject to the stress test, the stress capital buffer takes its place.
- Stress capital buffer. Sized by the Fed from the stress-test results. See our guide to bank stress tests.
- Countercyclical capital buffer. A buffer that regulators can raise when credit is growing excessively. The US rules include one, and the current setting is announced by the agencies, so check the Federal Reserve’s website.
- G-SIB surcharge. An additional requirement for the largest global systemically important banks, scaled to their systemic footprint.
If a bank’s ratios fall within a buffer, it is not in violation of its minimums, but automatic limits on dividends, buybacks and discretionary bonuses apply, and they tighten as capital falls.
Liquidity standards
Capital is half of the Basel III story. The other half is liquidity: two measures aimed at keeping banks able to meet obligations. The liquidity coverage ratio requires enough high-quality liquid assets to cover expected net cash outflows over a short stress period. The net stable funding ratio asks for stable funding over a longer horizon, matched to the liquidity of assets. These rules apply to larger banks, with scaled requirements for mid-size ones. The agencies publish the details, and they are separate from capital rules.
Tailoring by bank size
US rules apply requirements in tiers, based on asset size and other indicators such as cross-border activity and reliance on short-term wholesale funding. The result is that the largest firms face the full set, including advanced approaches, the supplementary leverage ratio, stress testing and surcharges, while community banks face simpler rules. Many community banks may elect an optional simplified measure, the community bank leverage ratio, instead of the risk-based framework if they meet eligibility criteria. Each of those thresholds and percentages is set in regulation, so consult the current rule.
A worked example
The following numbers are hypothetical and meant only to show the arithmetic.
A bank has $100 of risk-weighted assets, $11 of CET1 capital, $1 of additional tier 1 capital and $3 of tier 2 capital. Its total assets are $160.
- CET1 ratio: 11 / 100 = 11 percent
- Tier 1 ratio: (11 + 1) / 100 = 12 percent
- Total capital ratio: (11 + 1 + 3) / 100 = 15 percent
- Leverage ratio: 12 / 160 = 7.5 percent
Now the bank suffers $5 of losses. CET1 falls to $6 and tier 1 to $7, while RWAs stay at $100 for simplicity. The CET1 ratio drops to 6 percent, which is a much thinner cushion, and it may now sit inside its buffers. Management would be expected to retain earnings, stop buybacks and consider raising capital. If instead the bank had shifted $40 of RWAs from low-risk to high-risk assets, its ratios would have been reduced without any loss at all. That is why supervisors examine asset quality and why risk weights are a recurring focus of rulemaking.
Common misconceptions
“Capital is money the bank sets aside.” Capital is a source of funding, not a pile of cash. The asset side of the balance sheet holds the cash, loans and securities. Reserves, in the banking sense, are something else.
“Higher capital means banks lock up funds.” Capital requirements limit the funding mix, not a bank’s ability to lend per se. Banks respond by raising equity, retaining earnings or adjusting their assets, and the effects on lending are debated.
“Basel III is a US law.” It is an international standard that the US agencies implement through their own rulemaking, with differences from other jurisdictions.
“Passing the ratios means a bank is safe.” Capital is one dimension. Supervisors also assess liquidity, management, earnings, asset quality and risk controls.
FAQ
What is the difference between CET1 and tier 1 capital?
CET1 is common equity and similar items. Tier 1 adds additional tier 1 instruments, such as certain preferred stock, to CET1. Regulators emphasize CET1 because it absorbs losses most reliably.
What is the Basel III endgame?
It is a common label for the remaining revisions to the Basel framework, mostly changes to how risk-weighted assets are calculated. US agencies have issued proposals to implement them. Because the status can change, check the agencies’ current releases.
Do community banks follow Basel III?
Community banks are subject to US capital rules that draw on Basel concepts, but in simpler form. Some qualify for an optional community bank leverage ratio framework instead.
Who sets the numbers in the US?
The Federal Reserve, the OCC and the FDIC each issue capital rules for the institutions they supervise, and they coordinate on common standards. The Fed also sets requirements for holding companies.
Where can I read the actual rules?
Regulation Q, 12 CFR Part 217 on eCFR, is the Fed’s capital rule. The OCC and FDIC post their parallel rules on their sites, and the Basel Committee publishes its standards at bis.org.
Prepared with AI assistance from the public documents listed above and reviewed under our editorial policy. Not investment advice.